Buy About BIDI SFP optical fiber transceiver

RFQ Details

Greetings,Manufacturing companies of Strand Fiber Optic Cables1200 and splice boxes with IEC 1073-1 and YD/T814.1 is required for telecommunication layout for development projects Technical characteristics of the cable The values of the technical characteristics of the cable below must be entered: Dimensional Characteristics Nominal Outer Diameter (mm) mm Approximate Mass kg/km Mechanical Characteristics Maximum pulling force (IEC ***2E1) N Maximum Operating Pulling Force N Mechanical impact resistance Nm Crush Strength (IEC 7941E3) N/cm Usage Characteristics Minimum bending radius in static use mm Minimum bending radius in dynamic use mm Ambient temperature during installation (range) at C Ambient temperature of use (range) to C Storage Temperature (Range at C Splice boxes or 24-fiber optic cable junction joints Fiber optic cable splice boxes must comply with IEC 1073-1 and YD/T814.1 standards. They will need to be waterproof and anti-redness. Splice boxes will need to have 4 cable entry ports and be able to accommodate up to 4 24-fiber splice trays. They must be highly resistant to compression. Case closures must be made of polycarbonate to promote corrosion resistance and allow them to be used in aerial, sleeve and direct burial. Closures must incorporate a sealing component (gasket) that will facilitate installation and re-entry without the need for any special tools. All accessories must be provided to allow deployment in the ground and under the sheath. The need for splice boxes is estimated at around 300 for connecting cables and spare parts for maintenance. Quantitative table of requirements Article Quantity 24-Strand Fiber Optic Cables 1200 Splice box 300 The cable to be supplied must be compatible and suitable for deployment under a duct and in the ground or direct burial. It must be shielded by corrugated steel tape and provide complete protection against rodents. It must be ITU-T G652D compatible. This shielding, covered by a black HDPE outer sheath, is to be placed over glass wicks. The cable must contain 24 x 250 ?m single-mode fibers divided into 4 x 6-fiber tubes. The tubes should be different colors. The optical fibers contained in a tube must also be of different colors. The colouring of tubes and fibres must follow a standard colour code. The cable must be delivered by 06 kilometer drums with a regular, visible and indelible marking of the technical characteristics on the outer sheath. The cable must be sealed with gel in the tubes and with waterproof glass wicks. The cable must support the joining of the fibers by the fusion splicing method. Minimum Cable Build-up 1. 04 flexible tubes each containing 6 single-mode optical f What is the MOQ? What would be the delivery time? Can u send us your latest product catalog with complete quote prices. Do you offer free sample or what would be the charges of the sample?