I need HDPE and PP granules

RFQ Details

HDPE High Density Polyethylene
Density, kg/m³ at 20°С: 960 kg/m³ up to 966 kg/m³
Flow index at 190°С at rate of 2,16 kgs, g/10 min: 6 g/10 minup to 9 g/10 min
Yield point at tension, MPa, not less30
Rupture strength, MPa, not less: 23
Suitable for food contact
PP High fluidity injection molding polypropylene
Density at 23°С: 0,90 g/cm³
Melt Flow Rate (MFR) 230°С at rate 2,16 kgs: not less 25 g/10min
Flexural Modulusat 50 mm/min: 1500 MPa
Tensile Stress at Yield at 50 mm/min: 32 MPa
Elongation at Yield 50 mm/min: 13%
Suitable for food contact