Need **0x**8 lcd uc***8 (Quantity: *****0)

RFQ Details

Dear Sir /madam,


Our LCD requirement is attached. We require in 50k quantities a 240x128 graphical mono LCD FSTN positive with white led backlight with touch screen integrated and 4/8 bit parallel interface.
Please provide your low cost( commercial grade quote ) for the LCD. we prefer the UC1608 driver built in
Our detailed spec is attached. Please do mention if have a standard part close to our requirement as well. We would be interested in those as a samples first as well. Our intial volumes are *** number annual.

Thanks and Regards,
Sudhir
SR No Parameter Details
1 Application LCD to be used in household & handheld low cost product.
1 Module type COG
2 Termination Bounded pin type termination is preferable
3 Driver Interface 4 bit paralell interface (UC1608)
4 Display type FSTN type positive , graphical, monochrome
5 Module dimension Should be as small as possible for below mention viewing area
6 Viewing area dimension 3.8" to 4.3" diagonal size
7 Active Area min 77x41 mm
8 Resolution 256 X 128 pixels, 240x128 pixels
9 Front polarizer type Transmissive
10 Rear Polarizer Transflective
11 operating temprature -10 deg to +60 deg
12 Storage temprature -20 deg to +70 deg
13 Humidity 90% at 60deg temprature
14 Backlight White colour LED backlight inbuilt to module
15 Touchscreen 4 wire resistive
16 Touchscreen Interface Touch screen driver inside LCD module is preferable.SPI interface from driver is preferable
18 Viewing direction Best at 12'o clock & 6'o clock
19 Viewing angle Should be above 40 deg from 0, 90, 180 & 270 viewing angle
20 Contrast Ratio(Cr) 5
21 ESD Module should comply +/-8KV air & +/-6 KV direct discharge
22 Supply voltage 3V+/- 0.5 & current consumtion should be less than 3mA
23 backlight supply voltage 3V +/- 0.5 & current consumtion should be less than 50mA
24 Supply voltage for LCD driver Should be inbuilt to module
25 Life of module 50000 hrs
26 ROHS complience Required