Video optical transmission system

RFQ Details

Fibridge video transmitter/ data transceiver and video receiver/data transceiver series utilizes state-of-the-art digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of sixteen independent video channels, eight bi-directional audio channels, eight bi-directional data channels, four E1 channels and one 100M Ethernet over one single-mode or multimode optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. The product is widely used in the field of CCTV, video surveillance, national defense, ITS and etc.

*****
Support Console, WEB and SNMP format management
Monitor the module information including: Model, Version, Product description, Slot index, Device base information, Local Video Control, Local and Remote Video transmitting Status, Ethernet Status.
Support 1/2/4/8 channels Video plus E1, Ethernet, Audio, Data, concentrative management.
View the detailed information of power supply
Support real-time alarm and one history alarm message window

3.Specification

Power:
85-265VAC, 50/60Hz, standalone device
0.2A12VDC, rack card
Indicators:
Power, SYNC, Video, data

Video:
Channel: 16
Format: PAL/NTSC/SECAM
Video Signal: 1Vp-p, 75
Digitization: 8bit
Bandwidth: 8MHz
DG: <1%
DP: <1o
SNR: >65dB
Connectors: BNC

Audio:
Channel:4~8, Bi-dir
Audio Input: unbalanced, 600Ohms
Digitization: 16bit48k
Frequency: 10Hz to 20KHz
SNR:>70dB
Connector:RJ45

Data:
Channel: 8
Data Rate: 0~250Kbps
Data mode: 2-wire RS485
Connector: Terminal Block with Screw Clamps

Ethernet:
Data Rate: 10/100Mbps auto detect
Standard: IEEE802.3
Connector: RJ45
Auto-negotiation with half/full duplex

E1
Channel: 4
Rate:2.048Mbps 50ppm
Connector: BNC (75ohm