Want to buy cardlink (Quantity: ***0)

RFQ Details

ramy-***** Cardshare Client
Manual
Introduction
Thank you for buying your Cardlink! It is the solution
for making use of your smartcard on multiple recievers.
Please note that CARDLINK IS INTENDED FOR
PERSONAL IN-HOUSE USE ONLY AND SHOULD
NOT BE USED WHEN SHARING YOUR CARD IS
PROHIBITED BY YOUR CARD PROVDER!!!
This manual will guide you through the steps in order
to configure the Cardlink and explains its settings.
As the software in your Cardlink can be updated,
it may be, that this manual does not match the software
in your Cardlink. Please visit *****
regularly, in order to download the latest versions
of both the manual and the application software.
*****
Cardlink: the Card
Cardlink has got contacts to connect to your cardreader
on two sides, so you can insert your cardlink using
either side up. The network and power connector are
situated on one side of the Cardlink and should the
the cables be a problem you can easily turn the cardlink
upside-down. 4 LEDS will give you status-info
on the cardlink and it's connection to the cardserver.
The network connection on your cardlink is a standard
10Mbit Nethernet connection and can be connected to
your hub or router with a standard 1:1 networkcable
(not included with cardlink)
Software version 1.00
The powersupply that comes included with your cardlink
should be set to 6volt. Connect the networkcable from
your hub or sever and than connect power to the cardlink.
The first statuslight should turn green (link). If nothing
happens, please check the polarity of the powersupply:
the outher shell of th e connector should be ground (-)
and the innerconnector should be (+)
Cardlink: Software
If your local network has DHCP enabled, your cardlink
wil l recieve all network configuration settings automatically.
To resolve this ip-address, you can download
the cardlink Locator software, on our website for free:
You can find it at ***** and can be used
on any windows pc in your home-network and it will
find any cardlink in your house. When found, you can
select it, and click WEB to start a new browserscreen
and configuration can commence. You can also type
the IP-address in any computer in your network
Configuration
STATUS
This is a screenshot of the webinterface.
The status page gives you info on the connection with
the Ncardserver, the mode it is running and the number
of data-packages that have been requested by your server
also known as ECM's. If the Cardlink is net yet in a
cardreader, the last line you will see is the Mode.
The status screen gives you valuable information about
your cardlinks functionality and connection to your
server. But first we will have make the connection to
the network.
NETWORK
The network page enables you to set a fixed ip-address
rather than a DHCP defined address. Just select "Use
static IP� and click STORE.
Now you can modify the cardlinks ip-address at your
convenience. Please bear in mind that after changing the
ip-address of the cardlink and rebooting, you will need
to enter a new ip-address in your browser!
By factory default cardlink is set to DHCP.
With this setting, your modem/router/networkserver
will provide cardlink with the proper ip-setting to
work within your network
CARDSERVER
You can enter the NewcamD/NewCS cardserver
data, that you will find in your cardserver.
Enter your cardservers IP-address in the Cardserver
Host/IP field. If your homenetwork supports DNS,
you can also enter a HTTP address here. In the
Cardserver Port field, enter the port your server runs.
Newcamd/NewCS cardservers force you to use a username
and password. Because communication between
the cardlink and your server is encrypted, you are requested
to enter the same encryptionkey that is in your
server.
Click store and reboot to save your setting.
After the reboot (lights will go out) your cardlink will
attempt to connect to your server.
ADVANCED
On this page you may set the following options:
� Reconnect to server: When checked Cardlink
will try to reconnect to your server every
couple of seconds in case the connection to
your server gets broken due to heavy trafic
(***** downloading) or other issues.
� Protect server settings: Check to protect the
read-out or change of your cardserver data.
After unchecking, cardserver data is erased!!
� Status leds off: when checked LED's will go
dark, after connection was made with your cardserver.
StatusLEDs
LAN Link/Activity
Connected to Cardserver
No connection!
Card Reset/ATR
If configuration of cardlink and serversettings are correct
and cardserver is working properly, first 2 LED's will light.
If only the first green LED and the Orange LED are lit,
cardlink was unable to connect to your cardserver. Check
the status-screen of Carlink to see what's wrong.
2 Green LED's will show that connection is active and
cardlink is logged in on the server. You can verify the
status on the Status page.
Now you are ready to insert Cardlink in your clients cardreader.
The red LED will flash shortly indicating a cardrese.
t. Some flashing of the activity LED indicates the
card sends and recieves data from your server. Now your
cardlink works identical to the card in your cardserver.
Specifications
Hardware:
� ISO 7816 double sided smartcard interface
� 120 Mhz RISC CPU
� 576Kb Flash Rom (64+512)
� Status Led�s
� RJ45 Ethernet connector (10Base-T)
Software:
� Card share protocol: NewcamD / NewCS
� Card emulation: Seca/Mediaguard(r) 1/2, Irdeto(r) 1/2 (beta)
(Viaccess(r)/Conax(r) soon to be released)
� Security: 3DES/MD5 encryption
� Build-in web-interface
� Software upgradeable, check *****